About UsMediaMachines SalesJob ShopContact / Order


Click On Media Types Below



#1—A Slow cutting, extra long lasting, tough, high porcelain media, containing no aluminum oxide abrasives. It can be used for burnishing, polishing, and light deburring and also as a driver for loose abrasives. It has high resistance to chipping.

#2—A medium cutting ceramic media, which contains fused aluminum oxide. This relatively long lasting media gives good color and a fine finish with proper compounding.

#3—a fast cutting ceramic media designed to reduce cycle times, giving burr removal and corner radiusing while producing a fine matt finish.

#4—An ultra fast cutting ceramic media specially designed to reduce cycle times to the absolute minimum. It is ideal for quick burr removal, radiusing, and low RMS finishes. It produces a very fine matte finish.

#5—this fast cutting ceramic media contains silicon carbide and can be used in applications where aluminum oxide impregnation is not permitted and where parts are to be brazed or welded later. Produces fine matte and low RMS finishes.

#6—A high density media specially designed for high energy machine applications. Even though it is hard, it is also very resin to chipping, reducing seal wear problems. It is a fast cutting media and may be used for low energy applications.

#7—Lustre Bond is an ultra high density, extremely long lasting impervious ceramic media which produces a lustrous sheen on metals. Its density, along with its hardness and long life make it ideal as a driver for loose abrasives.

#8—Lustre Bite is formulated the same as Lustre Bond. It contains top quality abrasives, giving light metal removal in conventional machines and medium cut in high energy machines. Composition 8 is very long lasting in both applications.


Sizes Available:

Sizes Available:

  • 2mm Balls

  • 3mm Balls

  • 4mm Balls

  • 5mm Balls

  • 6mm Balls

  • 7mm Balls

  • 8mm Balls

  • 10mm Balls

  • 1.3mm x 2.7mm Cylinders

  • 1.7mm x 5.2mm Cylinders

  • 2.0mm x 6.0mm Cylinders

  • 2.5mm x 8.0mm Cylinders

  • 3.0mm x 10.0mm Cylinders

  • 4.5mm x 14.0mm Cylinders










14 Mill Street, PO Box 248 Bartlett, NH03812
Phone: 603.374.2341
Fax: 603.374.2366

Designed & Hosted By WebMarc Solutions